Brickstuff LEGO Power Functions Power Source v2 with 9" (22.8cm) Cable and 3 Channel 5V DC Output - SEED07

Using this power source and any LEGO IR controller or SBrick, you can create advanced lighting and effect setups such as directional lighting for trains, automatic reverse lights, and automatic turn signals for vehicles. The power source has three outputs: one "always on," one that is activated when a PF channel is in reverse/left, and one that is active when a PF channel is in forward/right. Any combination of Brickstuff lights or effect controllers can be connected to any output port.

This power source has three outputs, and it will work with any LEGO remote control (with a LEGO infrared receiver) or SBrick.

The three outputs are:

• Always on: like in the original version of our PF power supply, when your PF battery is on, the lights connected to this port are on
• "On When in Reverse/Left": lights and effects connected to this port are turned on when the PF channel the power supply is connected to is put in reverse or turned to the left (for example, on the LEGO IR remote, when the orange wheel is turned to the left)
• "On When Forward/Right": lights and effects connected to this port are turned on when the PF channel is put in forward or turned to the right (for example, when the orange wheel on the LEGO IR remote is turned to the right)

Using this power supply, it is now possible to create a number of new lighting and effect setups, including:

There are some important points to keep in mind about this power supply:

The power supply has three red indicator lights as shown in the photo above. These indicate when a given output channel is activated.
The following illustrations show several configurations for the power supply. All configurations work with SBrick ports as well (though note the SBrick behavior above when connected to the same channel as a motor).